Horse trailer pad # HTP24BK does not come pre-drilled because then it would limit what and where it could fit. We also recommend trailer horse pad screw # PS-8 to mount the pad. The screws are sold in quantities of 1. view full answer...
The Locking Stainless Steel Flush Door Latch, Part # L1833 does not come with a gasket or a striker plate.
This is a flush mount latch and will fit in doors up to 7/8 inches thick. I have attached a photo of the latch with the dimensions. I have also attached a link to our product page for the door latches we offer. view full answer...
The Replacement Handle Assembly for Polar Cam-Action Latch Kits # 158-100 comes with one handle. So if you are needing 2, you would want to order two of them. view full answer...
The BOLT Toolbox Latch Retro Fit Kit, Codes to Ford Key # BL7022698 that you referenced does not come with a striking plate. Since all of the handles we offer are either retro-fit kits or replacement parts, none of them come with a striking plate.
A latch that may work for you is the UWS Replacement Twist Latch # UWSTWISTLOCK. This lock mount entirely on the outside of the box and is lockable with a padlock. BOLT offers padlocks, like # BL7018519 for Ford keys, that can be keyed to vehicle... view full answer...
The Fastway Self-Locking Adjustable Aluminum Ball Mount # DTALBM6600 includes locks for both the adjustable-height ball platform and for the main shank portion that fits into your 2-inch hitch receiver. You do not need any additional parts to keep this secured to your Tundra. Please refer to the linked video for illustration.
Do note that the ball mount has a tongue weight (TW) capacity of 1000-lbs, comes with both a 2-inch ball rated for 8K and a 2-5/16-inch ball rated for 10K, and thanks... view full answer...
The Pack'Em Rack for Open Utility Trailers part # PK-6-OP1 does not come with any of the added accessories shown on the product page (i.e. cooler, leaf blower, lawn trimmer). The accessories are included in the photo to give customers a better idea of how the rack will look installed.
I have attached an installation video of the rack for you as well. view full answer...
The Classic Accessories RV Wheel Covers # CA80098 contains 2 total covers. If you would like to cover all 4 tires on your trailer you would need to get 2 kits for a total of 4 covers.
These Classic Accessories RV Covers fit RV tires 18-21 inches in diameter, I have included a helpful article that explains how to determine tire and wheel diameter for your reference. view full answer...
The Classic Accessories Dual-Axle RV Wheel Cover, part # CA80108, is a quantity of one cover to fit over the two tires on one side of a tandem-axle RV. view full answer...
The Classic Accessories Dual-Axle RV Wheel Cover, # CA80110, are sold in quantities of 1. This cover is designed for dual-axle RVs and trailers with 30 inch diameter wheels. For 2 pair enter 2 in the quantity box before adding to cart. view full answer...
No. The Classic Accessories RV Wheel Covers # CA80086 come in a set of two, so they'll have the covers for an entire axle. If you've got a single axle trailer, you'll only need one set of these. For a tandem axle trailer, you'd need 2 of these. view full answer...
The wiring for a 2015 Buick Encore is # C56216 and won't be an included item with the Curt Class-I trailer hitch # C11527. The reason wiring harnesses do not come with the hitch is because some vehicles already have a trailer wiring harness so we make them available separately.
The hitch # C11527 comes with a complete hardware kit and instructions.
If you happen to need a ball mount and hitch ball, I recommend ball mount # C45520 and 2 inch hitch ball # C40018 or a 1-7/8 inch ball # C40001.... view full answer...
The Curt Trailer Hitch Receiver # 13573 does not come with the hitch pin, that is sold separately. This is a 2 inch hitch, so all you need is the following:
- Trailer Hitch Pin and Clip # C21510 view full answer...
A drawbar, also known as a ball mount or stinger, is the part that fits into the hitch and provides a platform for a ball that the trailer will couple to. If you are looking at the Curt trailer hitch for a 2015 Honda Civic then you can use # C11391. The drawbar isn't included but you can add one using part # C45521. If you will be towing with the hitch then the ball size used needs to match what the trailer coupler requires. For a 1-7/8 inch ball use # 19256 and for a 2 inch use # 19258.
You... view full answer...
As long as you have a Jayco trailer, the Adapter 4 Way Flat to 6 Way Square for Jayco, item # 30104, is the only part that you will need to power the brake lights, turn signals and running lights on your trailer. You will not have trailer brake or 12 volt accessory power with this adapter. view full answer...
Yes, all of our hitches come with all the necessary mounting hardware. The drawbar, pin and clip and any accessories are sold separately.
I have linked instructions and a video installation of the Draw-Tite Trailer Hitch # 75282. view full answer...
The trailer wiring harness is not included with Curt trailer hitch # C11398 for your 2013 Chevy Sonic RS. The reason is because not everyone who installs a hitch is using it for towing or accessories that have lights. By making it separate the hitch price can be lower.
To add a trailer wiring harness you can use # 118640. This will add a 4-Way flat connector to the rear of the vehicle. I have linked a video showing an example installation for you. view full answer...
The DaLan Class I Fixed Bar Trailer Hitch, part # 217314 will come with all hardware necessary for installation. The ballmount on the hitch is permanently attached, so this hitch is not meant for use with a bike rack or other accessories. view full answer...
Yes, the Thule Chariot Cross Bike Trailer, Stroller, and Jogger # TH10202014-302 comes with the standard equipment for biking as well as the adapter kit to change it over to a jogging stroller.
I am attaching a link to some accessories we carry for these Thule trailer/jogger/strollers for you to check out as well. view full answer...
The Optronics LED Trailer Stop, Tail, Turn, Backup Light # STL68RB is sold as a single unit, with two required on a trailer. This LED light has a built-in mounting flange and has pigtail leads for connection to your trailer wiring.
The wiring scheme is as follows:
White wire is for ground
Brown wire is for backup light
Red wire is for brake light
Black wire is for tail light
A snap-on stainless-steel trim ring # A68SSB is available as a separate accessory. view full answer...
Yes, the Curt Trailer Hitch Receiver # C23WR does include the 6 bolts and washers for attaching to your 2023 Hyundai Santa Cruz.
I recommend installing the Vehicle Wiring Harness # CU94FR when you install the receiver. This will control the tail lights on most small trailer with a 4-way flat connector. It will also allow you to use Auxiliary Lights # C53201 if you have a hitch mounted accessory which impairs the view of your tail lights. view full answer...